The incoming share is now displayed on top of the root, so the FTUE, and the session verification in particular, could be bypassed.
- When the current account is not verified, wait for the FTUE to be complete before displaying the incoming share, as before.
- When the user selects another account which is not verified in the room select screen, display the session verification flow of
the FTUE for this account on top of the share. As in the FTUE, the user has to verify the session or to sign out.
- Expose the FTUE session verification flow with a new SessionVerificationEntryPoint, displayed by OtherSessionVerificationNode
which sets up the session graph of the account to verify.
- Introduce RoomSelectNavigator so that RoomSelectPresenter can request the verification of the selected session.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Expose edit/redaction send states and retry/abort send from the Rust SDK
Pending edits and redactions have their own send queue entries, separate
from the original event. Surface them so the UI can reflect and act on them:
- Add `SendTarget` (Event, Edit, Redaction, Reaction) to the matrix API,
with a mapper to the Rust SDK type.
- Add `editSendState` and `redactionSendState` to `EventTimelineItem` and
map them from the SDK item.
- Add `Timeline.retrySend` / `Timeline.abortSend`, which take a `SendTarget`
so the right queued request is retried or removed. Implement them in
`RustTimeline` and in `FakeTimeline`.
* Track edit and redaction send states on timeline events
`TimelineItem.Event` now carries `editSendState` and `redactionSendState`
next to `localSendState`.
- `failedToSend` is true when any of the three states is failed, so a
failed edit or redaction is shown like a failed message.
- `pendingSend()` returns the first pending state together with its
`SendTarget`; the read receipt row, the send failure dialog and the
timeline presenter use it instead of reading `localSendState` directly.
- `TimelineItemReadReceiptView` is restructured so the row is only
rendered when there is something to show, and the send state takes
precedence over read receipts.
- Update the previews provider and test fixtures for the new fields, and
make `aMessageEvent`'s send state nullable.
* Retry and remove failed sends through the timeline
Retrying or removing a failed message used the event's `SendHandle`, which
only knows about the original send. Route both through the timeline with
the `SendTarget` of the pending request instead:
- `TimelineController` gains `retrySend` (which also re-enables the send
queue) and `abortSend`, acting on the current timeline.
- `MessagesPresenter` retries via `retrySend`, and does nothing when the
event has no pending send state.
- Redacting something that was never sent (no event ID) or a pending
edit/redaction now aborts the queued request rather than sending a
redaction, and no confirmation is asked for.
- Update the presenter tests accordingly.
* Log send queue errors
Log when the SDK reports a send queue error for a room, and when the
send queue is disabled, to help diagnose messages stuck in the queue.
* Make sure we display send queue errors before verification states
* Fix logic for displaying read receipts and add more screenshot tests
* Only use states with read receipts in `ReadReceiptBottomSheetStatePreviewParam`
* Handle `LocalEventSendState = null` state just like `LocalEventSendState.Sent`
* Add `TimelineItemAction.AbortSend` and use it for both:
1. Aborting sending a message/edit/redaction from the 'sending failed' dialog.
2. Abort sending a local message when selected from the timeline -> redact action.
* Update screenshots
---------
Co-authored-by: ElementBot <android@element.io>
* Fix timestamp color to match the designs.
* Don't limit the call and unread row height to 16dp: the font size is not fixed and it might display components in a broken state
* Ensure the alignment works
* Remove `SemanticColors.unreadIndicator` and use `.iconAccentPrimary` and `.textActionAccent` instead
* Simplify and document `UnreadIndicatorAtom`
* Use `fontBodySmMedium` for the font size in the unread indicator
* Update screenshots
---------
Co-authored-by: ElementBot <android@element.io>
The incoming share was displayed in the logged in flow of the current
session, so it was destroyed when the current session was signed out, for
instance from another device. When another session was signed out, the room
select screen was kept and displayed an error if this session was selected.
To make the behavior consistent:
- The incoming share is now displayed by the RootFlowNode, on top of the
logged in flow, and does not depend on a session anymore. The latest used
session is passed from the RootFlowNode to the room select screen, through the
share flow, and is used as its initial session.
- When the root of the RootFlowNode backstack changes while an incoming share
is displayed, the new root is set below the incoming share, using the new
replaceRoot backstack operation, instead of removing all the elements.
- The room select screen handles the invalidation of the current session like
for any other session.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The config is the same for all the files and all the rooms, so there is no need to read it for each file.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Instead of creating a SharePresenter from the graph of another session, the
SharePresenter now gets the client of the selected session from the
MatrixClientProvider and uses an AppScope ShareDataSender to send the data.
To be able to send media from AppScope, MediaSenderRoomFactory is now bound in
AppScope and takes the MatrixClient as a parameter, and a new
MediaOptimizationConfigProviderFactory provides the media optimization config
of any session.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When several accounts are signed in, sharing into the app no longer goes through the account selection screen. The room select screen (Share mode) now displays the selected account and an account switch on top of the room list, with a design similar to the multi account section of the settings.
Selecting another account displays the rooms of this account in place, scrolled to the top, without recreating the screen. The content is then shared from the room select screen using the selected account, with the same progress and error dialogs as when sharing with the current account. The current account is switched only once the share has succeeded, then the room is opened if the content has been shared to a single room.
Implementation:
- RoomSelectNode is now in the AppScope and uses MatrixClientProvider to get the room list of the selected session.
- ShareNode gets the SharePresenter of the selected session from its session graph, using the new ShareBindings.
- SessionGraphFactory is moved to the matrix api module so that it can be used by features.
The account selection screen is still used for permalinks.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Add search backfill worker
This will run on background at most once an hour while the device has internet connectivity and the device is charging and start back-paginating through the user's rooms to make sure the search results are populated.
It'll run for the maximum time the default workers allow, 10 minutes.
* Create `RustMatrixClient.Factory` AssistedFactory to help with DI and add `SearchBackfillService`
* Start search backfill when entering the search screen, just once. This should help getting initial search results if none or few are found at first
Toggling this value had no effect because the feature was marked as finished so it wouldn't be displayed in the developer settings, which makes our code ignore any user-set value for it.
Instead, just create a `Feature` outside the `FeatureFlags` enum.
The tests and fakes were in `features.viewfolder.test.*`, which looks like a package of a test module, while they are in the `impl` module and test code from `features.viewfolder.impl.*`.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
It was the only file of the `startchat/impl` module in the
`features.startchat` package.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Some test sources were in `features.call`, `features.call.ui`,
`features.call.utils` and `features.call.notifications`, while the code
they test is in the corresponding `features.call.impl.*` packages.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The matrixmedia modules were using the `libraries.matrix.ui.media` package
(shared with the matrixui module) and `libraries.matrix.ui.media.*`
namespaces. Use `libraries.matrixmedia.api`, `libraries.matrixmedia.impl`
and `libraries.matrixmedia.test` instead, matching the module paths.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
AppMigration11 was run once, in the first release containing it, whatever
the state of the MultiAccount feature flag. Users installing the app
while the feature flag was disabled were considered as new users and
would never see the announcement once the feature flag got enabled.
The multi-account announcement is now pending by default (NeverShown),
and is marked as shown when the user enters the login flow while the
feature is enabled, either for the first time or to add another account.
Users who were already logged in before the feature became available
will see the announcement.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If the announcement was queued at upgrade while the user had a single
account, and the user then added another account without seeing it, the
announcement stayed pending and was shown later if the user removed an
account. Mark it as dismissed as soon as several accounts are detected.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Show a one-time bottom sheet on the home screen to announce that several
accounts can now be added (element-hq/element-meta#3349).
- Add `Announcement.MultiAccount`, which is never shown by default.
- AppMigration11 queues the announcement on application upgrade only,
and marks it as shown if the user already has several accounts.
- HomePresenter shows the bottom sheet only when the announcement is
pending, the MultiAccount feature flag is enabled and the user has a
single account.
- The "Add account" button hides the sheet, marks the announcement as
dismissed and starts the add account flow through the new
`HomeEntryPoint.Callback.navigateToAddAccount()`.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add the `screen.multi_account_announcement.*` keys to the home module
Localazy configuration and import the latest strings.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Some modules were using package names or namespaces inherited from copy-paste
or from older module names (e.g. `features.logout.impl` in the deactivation
module, `features.api` in the migration api module, `sessionstorage` in the
cachestore module), or containing typos (`roomaliasesolver`,
`roomdetetailsedit`).
Move the sources to the package matching their module, update the imports, and
rename the impacted screenshots accordingly.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Since Android 13, the system displays its own confirmation when content
is copied to the clipboard, so the application does not render its own
Toast or Snackbar anymore on those versions.
Context.copyToClipboard, CopyToClipboardUseCase and the direct
ClipboardManager usage in EventDebugInfoView are removed.
ClipboardHelper.copyPlainText(text, isSensitive, onSuccessOnOldDevice)
is now the only entry point, and AndroidClipboardHelper is the only
class using ClipboardManager.
Copy actions from the views are moved to their Presenter through new
events, or to the Node when there is no Presenter. A ToastHelper is
introduced so that Toasts are kept where they were used before.
Snackbars are kept where they were already used.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Use the password keyboard type, mark the field as a password for
autofill, and submit the reset with the IME "Done" action, matching
the login password field.
Benoit Marty
bmarty
Benoit Marty
Jorge Martin Espinosa
mxandreas
ganfra
ganfra
Bardi Harborow