Synapse deletes sliding sync connections that have been unused for 7 days. When
an OEM battery manager has kept the application frozen for longer than that, the
next sliding sync request is answered 400 M_UNKNOWN_POS.
The Rust SDK handles that: it resets `pos` and, in offline mode, restarts the
sync. When that recovery gives up, the sync service ends up in the Error or
Terminated state and stops for good, and it is then up to the application to
call start() again. Element X iOS does it, we do not: SyncOrchestrator only
restarts the sync service when its state is Idle, so the sync stays dead for the
rest of the process lifetime.
Nothing recovers from there. The sync never reaches Running, so
waitForE2eeInitializationTasks() never returns, the session verified status
stays Unknown, and the FTUE is stuck on WaitingForInitialState. Clearing the
application data is the only workaround.
Restart the sync service when it is in the Error or Terminated state, with an
exponential backoff from 1s to 30s to avoid hammering a failing homeserver. The
backoff is only reset once the sync service has been running for a while, since
startSync() moves the state to Running right away.
Fixes#7689
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
emptyNode() renders nothing at all, which is fine for a placeholder that is left
within a few frames, but makes the application look frozen when the wait can
last, or never end.
Add a delayBeforeShowingContent parameter to emptyNode(): when it is finite, a
progress indicator and a "Loading…" label fade in after that delay, reusing the
existing DelayedVisibility helper. It defaults to Duration.INFINITE, so the
splash screen keeps rendering an empty canvas.
Use a one second delay on the two placeholders which are not guaranteed to be
left: the FTUE one, rendered while waiting for the session verified status, and
the LoggedInFlowNode one, rendered while the FTUE state is unknown.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
While the homeserver is unreachable but the device still has a working
network, the app showed no indication at all: the syncing chip is hidden
as soon as the SDK reports the session offline, and the offline banner
only appears when the device itself has no connectivity. A blocked or
down server was therefore indistinguishable from a quiet, healthy one.
The chip now has three states rather than a boolean, and the third says
"Server unreachable" for exactly that case. When the device has no
network the chip stays hidden, because the offline banner already says so
and two overlapping messages would be worse than one.
Part of #4099
The 174 commits develop gained since this branch was cut touch preview data
in three ways, and each is resolved so the flipped konsist rule still holds
across the merged tree.
Two screens the branch had renamed were deleted upstream by "Remove the
account provider search screen and homeserver resolver": the
changeaccountprovider and searchaccountprovider packages. Their deletion
wins, so ChangeAccountProviderStatePreviewParam, SearchAccountProviderStatePreviewParam
and the two views that used them go with them rather than coming back
under the new name.
Two preview classes develop added still carried the old suffix and are
renamed here, along with the `@PreviewParameter` reference in each view:
GlobalSearchStateProvider -> GlobalSearchStatePreviewParam and
SendFailureDialogStateProvider -> SendFailureDialogStatePreviewParam.
Everything else merged textually. No production class extending
PreviewParameterProvider is left with a `Provider` name, and no reference
to any of the 194 renamed names survives outside the CHANGES.md entry that
records a past pull request title.
The fake was declared in RootFlowNodeTest, so other tests could not use
it. Move it to the testutils module, in the node package, and make its
documentation generic.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fake was declared in RootFlowNodeTest, so other tests could not use
it. Move it to the testutils module, in a new node package.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fake presenter was declared in RootFlowNodeTest, so other tests could
not use it. Move it to the testutils module, in a new presenter package,
along with MutablePresenter.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
MatrixSessionCache and SyncOrchestrator were in the di package, which
does not describe what they do. Move them, along with their tests, to a
session package, and extract FakeSyncOrchestratorFactory from
RootFlowNodeTest so that other tests can use it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
RootFlowNodeTest was declaring its own no-op fake, while the oauth test
module already provides one. Use it, and move it out of the customtab
package, since it is not specific to the custom tabs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fake was declared in RootFlowNodeTest, so other tests could not use
it. Move it next to the API it fakes, in a package mirroring the one of
the API, and let the result be provided by the caller, so that the case
where the account provider is not allowed can be tested too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fake was declared in RootFlowNodeTest, so other tests could not use
it. Move it next to the API it fakes, and let the cleared cache event
flow be provided by the caller, so that a test can emit events.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fakes were declared in RootFlowNodeTest, so other tests could not use
them. Move each of them next to the API it fakes, following the existing
convention of a createNodeResult lambda defaulting to lambdaError():
- FakeLoginEntryPoint in features/login/test
- FakeBugReportEntryPoint in features/rageshake/test
- FakeSignedOutEntryPoint in features/signedout/test (new module)
- FakeAccountSelectEntryPoint in libraries/accountselect/test (new module)
The login and rageshake test modules did not have Appyx on their
classpath, so add the architecture module to their dependencies.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
At cold start two writers set the root nav target of RootFlowNode: the
intent path (handleIntent -> onLoginLink -> NotLoggedInFlow(params)) and
the first nav state emission (NotLoggedIn -> NotLoggedInFlow(null)).
safeRoot() only dedupes on strict equality, so the two targets do not
cancel each other out and the last writer wins, silently dropping the
login params.
Keep the params coming from the intent as pending state on the node, and
let the nav state observer take them into account, so that the root is
derived from both the logged in state and the pending login params, and
both orderings converge on the same target. The pending params are
cleared when leaving the not logged in flow, so that a later sign out
does not resurrect a stale provisioning link.
Also log when switching to the not logged in flow, since the drop was
silent. The login hint can contain an email address, so only its
presence is logged.
Closes#7482
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
MainActivity is a singleTask activity that declares the elementx://open deep
link, so tapping a notification makes that deep link the base intent of the
task. When the user later brings the app back from the recents list, the
system replays that base intent with FLAG_ACTIVITY_LAUNCHED_FROM_HISTORY, the
resolver turns it into a navigation again and the user is pushed back into the
room they had already left.
Ignore any intent the system replayed from the history, the same way the
launcher intent is already ignored.
* Don't restart the sync service if the client is shutting down
This was causing issues when clearing the cache:
1. The client would ask the SDK to clear the caches.
2. The SDK would stop the sync service, clear the caches and set the `pos` value of sliding sync to 0 so the HS returns all the required state the next time the client is used.
3. However, between the sync service being stopped with the `pos=0` change and the client being destroyed, there was enough time for the `SyncOrchestrator` to decide the sync service was stopped for no good reason since there is network connectivity and the app is on foreground, so it restarted the sync, with `pos=0`.
4. This value was persisted, and the next time the new client did an 'initial sync' it had a `pos != 0`, which the HS uses to avoid returning some required state it already fetched.
5. The room list now lacks state events for lots of rooms and room names, avatars, members, etc. are now missing.
---------
Co-authored-by: Benoit Marty <benoitm@element.io>
The `Provider` suffix reads as a dependency provider rather than as preview
data, and it collides with the real providers in the codebase — `StringProvider`,
`PickerProvider`, the login feature's `AccountProvider` — so the name says
nothing about which of the two a class is. `PreviewParam` says it.
195 classes are renamed, along with the 185 files named after them, the konsist
rule that enforces the convention, the presentation-class file templates and the
onboarding documentation.
This cannot be split. `Konsist.scopeFromProduction()` scans the whole project, so
flipping the assertion before every class has moved leaves the rule red, and a
rule that accepted either suffix during a transition would be exactly the kind of
compatibility layer this convention change is meant to remove.
Two judgement calls in the rule itself. The `name.endsWith("PreviewProvider")`
exclusion is dropped: its only job was to reject a redundant `Preview` before
`Provider`, and the new suffix already contains it; no class currently ends with
`PreviewProvider`, so removing it changes nothing today. And
`EditableAvatarViewUriProvider` is renamed rather than deleted from the exclusion
list even though no such class exists in this repository, since it presumably
comes from the modules overlaid for the enterprise build.
Nothing keyed off the old suffix: no snapshot filename contains a provider class
name, so no Paparazzi image changes, and the Kover variants match on `*Presenter`,
`*State` and `*ViewKt`, so coverage bounds are unaffected.
* Extract `IsEnterpriseBuild` use case
Having it inside `EnterpriseService` made having DI cycles with the `BuildMeta` provider too easy
* Rename `EnterpriseService.defaultHomeserverList()` to `homeserverAllowList()`
This seems more aligned with the way this list works
* Move most of the logic from `:libraries:wellknown` to `:enterprise:feature:enterprise`, both `shared` and `impl` modules
Ideally I would have added everything into `impl`, but some of the classes needed to be shared between the different `:enterprise:features` modules, and those are in the `shared` module, lacking a better name/strategy
* Add `EnterpriseService.isElementProEnforced`
With this, we don't need to provide the `RemoteEnterpriseConfig` anymore to any consumers, everything goes through `EnterpriseService` or other providers
* Remove `EnterpriseService.overriddenElementWellKnown`
This leaks the remote enterprise config/element well known contents to the app in a public interface.
* Create `CustomMapTilerConfigProvider` to avoid leaking the `RemoteEnterpriseConfig` in public APIs
This commit also starts moving some of the well-known related values to the enterprise modules
* Add missing docs to `EnterpriseService` and `SessionEnterpriseService`
* Fix tests
* Fix lint issues
* Bump enterprise module
* Create a new room when inviting people to a DM
* Improve screenshot tests
* Update screenshots
---------
Co-authored-by: ElementBot <android@element.io>
* First live location sharing sending implementation
* Simplify logic around canStop sharing
* Add some debug logs around LiveLocationSharingService
* Add LiveLocationException
* Expose beaconId to identify the current share
* Throttle live location instead of debouncing
* Keep sync alive when sharing live location
* Improve LiveLocation sharing
* Show LiveLocationDisclaimer
* Read minDistanceUpdate in LiveLocationSharingService
* Set minDistanceUpdate in AdvancedSettings
* Display banner in room when sharing live location
* Fix tests around LiveLocationSharing
* Ensure shares are properly restarted/stopped when app is re-launched
* Ensure LLS data is cleared when session is removed
* Update and fix LLS tests
* Handle Start LLS in ui
* Add check LLS permissions
* Remove hardcoded strings
* Fix quality and format
* Create DeviceLocationProvider so we can share location data between sources (presenter/live location service)
* Update screenshots
* Fix warning
* Do not try to stop if it was not sharing
* Revert "Create DeviceLocationProvider so we can share location data between sources (presenter/live location service)"
This reverts commit ba12bd968e82941cc231bdbb449310b24c97c5b8.
* Tweak location provider config values
* Address PR review remarks
* Fix ktlint
* Update screenshots
* Fix some tests after merging develop
* Adjust TimelineItemLocationView ui to match figma
* Update screenshots
* Documentation and cleanup
* Remove temporary resource
---------
Co-authored-by: ElementBot <android@element.io>
Co-authored-by: Benoit Marty <benoit@matrix.org>
Co-authored-by: Benoit Marty <benoitm@matrix.org>
- libraries.sessionStorage.api
- projects.libraries.architecture
from `api` to `implementation`.
Modules who need `:libraries:matrix.api` do not necessarily need to use the session storage api.
* Take into account homeserver capabilities: add `HomeserverCapabilitiesProvider` to check if the HS allows changing the user's display name or avatar. Also, modify the edit user profile screen to reflect these values.
* Add `/myavatar` command. Filter both `/nick` and `/myavatar` commands based on the homeserver capabilities.
* Update screenshots
* Assume the use can change their display name and avatar url if the capabilities check fails: if they try to change those, the HS will return an error anyway.
* Disable also `/myroomname` and `/myroomavatar` based on the HS capabilities.
---------
Co-authored-by: ElementBot <android@element.io>
Benoit Marty
ElementBot
jmartinesp
hayaksi1
Benoit Marty
Jorge Martín
ganfra
ganfra
Timur Gilfanov
bmarty