Metro's @BindingContainer replaced Dagger's @Module, but the declarations
kept the old Module suffix. Rename them (and their dedicated files) so the
type name matches the annotation, matching UserStatusBindingContainer which
already followed this convention.
No behaviour change: Metro discovers containers via @ContributesTo, so there
were only two call sites to update, both in tests.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make PIP react to camera orientation changes in the other participant's device
Adds a `controls.onPipMediaOrientationUpdate` callback for the WebView that will trigger a new `pipParamsBuilder.setAspectRatioFromOrientation(orientation)` method
* Fix warning about `PictureInPictureParams.Builder.setAspectRatio` only being available on API 26+
RootFlowNodeTest was declaring its own no-op fake, while the oauth test
module already provides one. Use it, and move it out of the customtab
package, since it is not specific to the custom tabs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fakes were declared in RootFlowNodeTest, so other tests could not use
them. Move each of them next to the API it fakes, following the existing
convention of a createNodeResult lambda defaulting to lambdaError():
- FakeLoginEntryPoint in features/login/test
- FakeBugReportEntryPoint in features/rageshake/test
- FakeSignedOutEntryPoint in features/signedout/test (new module)
- FakeAccountSelectEntryPoint in libraries/accountselect/test (new module)
The login and rageshake test modules did not have Appyx on their
classpath, so add the architecture module to their dependencies.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Develop gained resolveImageMimeType, which reads the image header so a
share that declares a broad type is encoded as the format it really is.
Resolving the wildcard first would hand that helper a concrete image/jpeg
and make it return early, so a transparent PNG shared as image/* would be
flattened and an animated GIF would be recompressed. The header is now
read from the type the sender declared and the default subtype is applied
to whatever comes back, so the sniffing still runs and an undecodable file
no longer keeps a wildcard.
A non-image shared as image/* is therefore sent as image/jpeg rather than
image/*, which is the whole point of this branch, so the test covering
that case now expects the default subtype.
Tapping a room alias whose server is down left the resolver screen on a
spinner for as long as the screen stayed open, with no way forward other
than going back.
Bound the resolution with the ten second timeout already used when
joining a room by address, so the retry dialog is shown instead. The fake
client's resolve lambda becomes suspending so a server that never answers
can be simulated.
* Keep the send button when the composer is emptied while editing
rememberEndButtonParams checked whether the composer had sendable text
before it checked whether the user was editing a message, so clearing
the text of a message being edited replaced the send button with the
voice recorder button. Starting a recording from there abandons the
edit.
Check the editing branch first, as the formatting composer already does,
and let it render a disabled send button when there is nothing to send.
* Update screenshots
* Request media audio focus when playing a voice message
Voice message playback asked for audio focus with
USAGE_VOICE_COMMUNICATION, the same bucket as Element Call and voice
message recording, while the player itself renders on the media stream.
Audio policy layers act on the declared usage, so a car head unit
switches to its call audio context and routes the playback away while
the player keeps running.
Declare USAGE_MEDIA (and STREAM_MUSIC on the legacy path) for playback,
which is what the player actually renders. Recording and Element Call
keep asking for voice communication focus.
* Keep playing a voice message through a short sound from another app
A notification, a navigation prompt or any other app taking focus for a
moment sends AUDIOFOCUS_LOSS_TRANSIENT or AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK,
and DefaultMediaPlayer pauses on it. The voice message stops part way
through and the user has to find it again and restart it.
Recording already ignores those two, because the capture path is not
affected by focus. Give voice message playback the same treatment, moving
the requester test into a named function rather than growing the inline
condition. A permanent AUDIOFOCUS_LOSS, a real phone call, still pauses,
and the media viewer is untouched.
* Model the fake voice recorder on a cancellable recording job
FakeVoiceRecorder pushed a whole recording synchronously from a single
suspending call, which made it both weaker and stricter than
DefaultVoiceRecorder.
Every level emission carried the same elapsed time and the emissions were
coalesced by Molecule, so no intermediate recording state was observable and
the level-limit test had to skip half the emissions to compensate. Each level
now advances the test time source and suspends for its share of the recording
duration, so the states arrive one at a time and that magic number is gone.
Call verification moved to the constructor lambdas the rest of the repo uses,
in place of hand-rolled counters and assertCalls. The counters discarded the
argument, so nothing pinned that cancelling a recording stops it with
cancelled = true; that is now asserted. Truth is no longer needed by the
fixture module.
A second startRecord() no longer raises an error where production only warns
and returns, and stopping or deleting terminates an in-flight emission loop
the way cancelling the real recording job does, so a stale recording state can
no longer arrive after the recording has finished.
* Keep each recording's level loop to its own recording
The level loop checked a single isRecording flag, which cannot tell "this
recording was cancelled" from "a later recording has started". After a cancel
followed by a new start, the first loop resumed, saw the flag set again, and
advanced the shared test time source, so the new recording reported the elapsed
time of both. Each recording now carries an id and its loop stops as soon as
that id is no longer the active one.
* Rename `UrlContentFetcher` to `ClientUrlContentFetcher` and add missing base URL data (server name, homeserver URL)
* Avoid passing the `homeserverUrl/serverName` around.
Calculate the URL in `DefaultRemoteEnterpriseConfigRetriever` using the newly added `homserver` and `server` values as the possible base URLs, depending on the remote config source
* Make sure we don't perform blocking requests to fetch the remote config when restoring a session
Add a `needsRefresh` parameter to `RemoteEnterpriseConfigResult.NotFound` to handle this, and store a `no-config` value in the store to indicate an endpoint has been checked and no config was found
* Bump enterprise module
* Don't restart the sync service if the client is shutting down
This was causing issues when clearing the cache:
1. The client would ask the SDK to clear the caches.
2. The SDK would stop the sync service, clear the caches and set the `pos` value of sliding sync to 0 so the HS returns all the required state the next time the client is used.
3. However, between the sync service being stopped with the `pos=0` change and the client being destroyed, there was enough time for the `SyncOrchestrator` to decide the sync service was stopped for no good reason since there is network connectivity and the app is on foreground, so it restarted the sync, with `pos=0`.
4. This value was persisted, and the next time the new client did an 'initial sync' it had a `pos != 0`, which the HS uses to avoid returning some required state it already fetched.
5. The room list now lacks state events for lots of rooms and room names, avatars, members, etc. are now missing.
---------
Co-authored-by: Benoit Marty <benoitm@element.io>
* Resolve the real image format before choosing the encoder
The upload pre-processor picks the encoder from the mime type it is
given. When an image is shared from another app that type is often
broader than the image really is, so a transparent PNG shared as a
wildcard image type is re-encoded as JPEG and its alpha channel is
flattened to black.
Read the format from the image header when the declared type is not
already a concrete PNG or JPEG, and use that to decide both whether the
image can be compressed at all and which encoder to use.
* Cover the mime type fallbacks the wildcard resolution introduced
resolveImageMimeType now decides whether an image is compressible, so two of
its outcomes had no test: a GIF shared with a wildcard type has to be
recognised and left uncompressed rather than recompressed into a still, and a
file the decoder cannot read at all has to fall back to the type it was shared
with.
The isMimeTypeImage() guard on the decoded type is dropped with them. The
BitmapFactory decoders only ever report an image type in outMimeType, so the
guard could not fire and there was no way to exercise it.
* Update dependency org.matrix.rustcomponents:sdk-android to v26.08.17
* Fix API breaks:
- `ClientBuildException.WellKnownLookupDisabled` should be handled now.
- `Client.sendReply` returns a `Result<SendHandle>` now. We can ignore it like we do for `Client.send`.
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Co-authored-by: Jorge Martín <jorgem@element.io>
* Extract `IsEnterpriseBuild` use case
Having it inside `EnterpriseService` made having DI cycles with the `BuildMeta` provider too easy
* Rename `EnterpriseService.defaultHomeserverList()` to `homeserverAllowList()`
This seems more aligned with the way this list works
* Move most of the logic from `:libraries:wellknown` to `:enterprise:feature:enterprise`, both `shared` and `impl` modules
Ideally I would have added everything into `impl`, but some of the classes needed to be shared between the different `:enterprise:features` modules, and those are in the `shared` module, lacking a better name/strategy
* Add `EnterpriseService.isElementProEnforced`
With this, we don't need to provide the `RemoteEnterpriseConfig` anymore to any consumers, everything goes through `EnterpriseService` or other providers
* Remove `EnterpriseService.overriddenElementWellKnown`
This leaks the remote enterprise config/element well known contents to the app in a public interface.
* Create `CustomMapTilerConfigProvider` to avoid leaking the `RemoteEnterpriseConfig` in public APIs
This commit also starts moving some of the well-known related values to the enterprise modules
* Add missing docs to `EnterpriseService` and `SessionEnterpriseService`
* Fix tests
* Fix lint issues
* Bump enterprise module
* Explain a rate limiting push gateway in the notification troubleshooter
The push loop back test printed whatever HTTP status the gateway
answered, so a user throttled by the public ntfy.sh gateway was told
"Error: HTTP 507", which reads as a server fault rather than as a quota
they can wait out or move away from.
Map the two statuses that mean the notification was throttled onto a
typed failure and give the troubleshooter a message that says what to do.
* Import strings from localazy, remove `temporary.xml` in `:libraries:push:impl`
---------
Co-authored-by: Jorge Martín <jorgem@element.io>
The old name read as though the default subtype always replaced whatever the
receiver carried, when a mime type that already has a concrete subtype is
returned untouched.
Benoit Marty
Benoit Marty
Jenna Vassar
Jorge Martín
hayaksi1
Benoit Marty
ganfra
renovate[bot]