* Remove the now unused setting to disable in-app notifications.
* Move visible account settings into AccountSettings.
Have ignored enableNotifications for now as that will require reworking the NotificationManager.
* Allow different sounds to be selected for each account.
* Move defaultNotificationTone into AccountSettings.
* Avoid repeated space membership scans in room search
Signed-off-by: Ivan Magda <imagda15@gmail.com>
* Refresh room candidates when space membership changes
Keep known space room IDs in a set updated by the room publisher and by
successful additions. Filter both suggestions and search results through
that set, retaining exclusions while the space list resets and reloads.
Preserve the initial recent-room eligibility filter so existing children
do not consume the five suggestion slots. Cover live membership updates
and partial-save filtering in both candidate lists.
---------
Signed-off-by: Ivan Magda <imagda15@gmail.com>
The forward, share, add-to-space and search pickers signal reaching the
bottom of the list with an empty `roomCount..<roomCount` range. The
prefetch sink added in 9dd9fd917 guards on `!range.isEmpty` to skip the
initial `0..<0`, which also dropped the pickers' bottom signal, so they
never loaded past the first 100 rooms.
Only skip `0..<0` instead, which leaves the home screen prefetch as it
was, and cover the bottom, prefetch and top cases in
RoomSummaryProviderTests.
* Bump element-call-ios to 0.1.0-rc.10
The release moves the RTC core to matrix-rust-rtc's room-first API, so the
stack no longer needs starting or stopping: it subscribes to a room when a
call opens it. It also adds headphones and Bluetooth audio output icons,
mapped here to Compound's headphones icon.
* Bump compound-design-tokens to 11.3.1 and use the Bluetooth output icon
11.3.1 adds the `bluetoothOutput` icon, replacing the `headphonesSolid`
placeholder for the Bluetooth audio route in native calls.
Sign-in now creates and stores its session through the
UserSessionManagerProtocol rather than the UserSessionStore, so the
AppCoordinator no longer holds the store.
- The manager forwards clientSessionDelegate and
userSession(for:sessionDirectories:passphrase:) to its store. As with
restoring, the new session isn't registered until the AppCoordinator
adds it.
- AuthenticationService takes the manager, for both sign-in and soft
logout.
- The store mock's configuration moves to the manager mock.
Set the chats tab's badge count from the same value used for the app badge.
The tab bar already renders it through the .badge modifier but that has no
effect outside of a TabView or List, so the iPad tab rail now overlays a
small NotificationCountBadge instead.
The sync update action is sent from the room list service state listener,
which fires before the SDK has applied the new unread counts, leaving the
app badge one sync behind. Drive both the badge and the clearing of
delivered notifications for fully read rooms from the room list publisher
instead, moving the observer from the ChatsTabFlowCoordinator into the
UserSessionFlowCoordinator.
The NotificationManager now receives the badge count from the caller so the
same value can be reused elsewhere.
Extract the unread notification count capsule from the room list cell into
its own view so it can be reused elsewhere. It caps the displayed value at
99+ and comes in a medium size (used by the room list) and a small size.
* Remove the dynamic member lookup from UserSettings in favour of nested access.
* Remove forwarding methods from UserSettings.
* Update the Enterprise submodule.
The state machine routes `.createdUserSession` from `.softLogout` to
`.signedIn`, but the AppCoordinator transition handler had no case for
it, so signing back in from the soft logout screen hit the
`fatalError("Unknown transition")` default.
Set up the user session as a restored one (`isNewLogin: false`): the
soft logout login reuses the same device ID and crypto store, and the
onboarding flow still starts if anything is outstanding.
A background launch doesn't always connect a scene, so nothing started
the session restore and both background app refresh and search backfill
gave up without a session.
Store optimizations are skipped while in the background, as vacuuming can
outlast the task and get the app killed before the remaining migrations run.
* Present the multi-account announcement when nothing else is showing
The user session flow owns onboarding, verification and settings, so it presents the announcement in the tab sheet slot with the lowest priority: once the verification state is known, and whenever onboarding, settings or a verification sheet is dismissed. Routes and sign-out dismiss settings without triggering it, and it is marked as seen when presented.
* Show the multi-account announcement on the home screen
Following review, the announcement is a best-effort sheet on the home
screen instead of a UserSessionFlowCoordinator state. It's presented when
the room list appears with the flag on, the announcement armed and the
session verified, and counts as seen once its content appears.
- Restore UserSessionFlowCoordinator to develop.
- HomeScreenViewModel presents the announcement through a binding and
waits for a known verification state, so it never competes with the
identity confirmation onboarding.
- Add account only closes the sheet until the add account flow exists.
- Rename MultiAccountAnnouncementScreen to MultiAccountAnnouncementView
and drop its unused coordinator and view model protocol.
- Size the sheet from the measured navigation bar height and match the
Figma spacing; the hard-coded 44pt pushed the content under the button.
* Present the multi-account announcement from the home screen view model
The announcement no longer needs its own view model: the view takes the
home screen's context and presents through a boolean binding, like the
home screen banners.
- Drop MultiAccountAnnouncementViewModel and its models. The view sends
home screen actions to close or add an account and builds its own
attributed subtitle.
- Check the verification state when the room list appears instead of
waiting for it. Restored sessions already know it by then, unverified
ones get the identity confirmation cover first and the room list
appears again once it's dismissed. Nothing is left subscribed, so the
sheet can no longer turn up later wherever the user is.
* Make the UserPreference macro also generate an accessor for the key name.
* Initial implementation of AccountSettings.
- Add an AccountUserDefaults storage with a userID prefix on the key.
- Migrate the 2 values reset by AppSettings.resetSessionSpecificSettings to AccountSettings.
* Rename UserSettings.volatile() to UserSettings.mock()
Given it now has a userID parameter with a default value..
* Add the multi-account announcement screen
A self-sizing bottom sheet telling users they can now add multiple accounts, matching the designs. Close and Add account both report back to the coordinator; nothing presents it yet.
* Use the Localazy strings for the multi-account announcement
The copy now lives in Localazy as screen.multi_account_announcement.*, named after the screen rather than the room list.
* Apply review suggestions to the multi-account announcement
- Use an ElementNavigationStack with a toolbar close button, like RedactConfirmationView, instead of an overlaid glass button.
* Remove the large text preview from the multi-account announcement
Other sheets built the same way don't snapshot Dynamic Type sizes, and the iOS 26 bar material it would show isn't rendered in snapshots.
* Use TitleAndIcon for the multi-account announcement
TitleAndIcon now takes an attributed subtitle (#6274), so the sheet no longer needs to rebuild its layout by hand. The snapshots are unchanged.
* Add a multi-account feature flag
The flag lives in Developer options. Switching it on arms the upcoming one-time multi-account announcement, whose seen state defaults to true so fresh installs never see it.
* Add an Add account row to Settings behind the multi-account flag
The row sits in its own section under the user status, as in the designs. Tapping it is routed up to the settings flow, which ignores it until the add account flow exists.
* Remove the Developer options view model tests
The Developer options screen is excluded from coverage, so these tests don't add value.
* Apply review suggestions to the multi-account flag
- Order the multi-account requirements in DeveloperOptionsProtocol to match the screen's sections.
- Drop the redundant "Experimental" from the toggle's subtitle.
* Minor tweaks to User Status.
- Change the layout of the status emoji on the Setting button.
- Remove the status emoji from the Settings screen (it's shown directly below in the status row).
Opening a room on an event always built a detached timeline, even when the
live timeline already contained that event, e.g. when tapping the notification
for the newest message in a room.
The timeline controller now stays on the live timeline in that case, scrolling
to and highlighting the event, and only builds a detached timeline when the
event isn't loaded.
This reverts commit 4c71cae0f.
Comparing against other delivered notifications doesn't reflect the timeline:
in rooms set to mentions and keywords, after swiping away newer notifications
or with messages sent from another device, newer messages can exist without a
notification, so the room opened live with the tapped event out of view.
On a cold launch the home screen appeared just before the cached rooms
published, briefly showing skeletons that were immediately replaced.
The home screen now starts in a new awaitingCachedRooms mode, keeping
the list blank while a cached room list is about to publish and falling
back to the skeletons after 500ms. Without a cache the skeletons show
straight away as before.
* Initial plan
* Offer only joined rooms in destination pickers
Co-authored-by: Velin92 <34335419+Velin92@users.noreply.github.com>
* Clean whitespace in share picker test
Co-authored-by: Velin92 <34335419+Velin92@users.noreply.github.com>
* Restrict the shared picker room list to joined rooms
The alternate room summary provider, which backs the forward, share and
Add rooms pickers and global search, now always includes the SDK's
joined filter in its base filter. This replaces the per-call joinedOnly
flags, so Add rooms no longer offers invited rooms or spaces and no
screen can forget the flag.
A filter set before the provider has its room list is now applied once
the list is set, instead of being reset to the default. The share picker
hit this on a cold launch from the share extension.
The forward and share pickers also hide upgraded rooms, matching the
Suggestions section. The SDK has no filter for these.
Also registers the share picker's test file in the project, fixes the
blank-line indentation SwiftFormat flagged, and re-records the picker
snapshots without the upgraded room.
* Check room membership for forwarding suggestions and search breadcrumbs
RoomSummary now has isJoined, built from the room's membership. The
forwarding suggestions and the search breadcrumbs used a missing
joinRequestType to mean joined, which is also the case for rooms that
have been left or banned from. It only worked because the room list's
base filter already drops those.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: Velin92 <34335419+Velin92@users.noreply.github.com>
Co-authored-by: Mauro Romito <mauro.romito@element.io>
The room list keeps showing skeletons while the provider reports loaded
but no summaries have published yet, to avoid flashing an empty list
before the first batch lands. That guard also fired when a filter
(chips, space or search) legitimately matched nothing, leaving the home
screen on placeholders forever instead of showing the empty filter
state.
* Announce toasts with VoiceOver
Toasts are posted from a separate overlay window and never take
VoiceOver focus, so their text was never spoken. UserIndicatorController
now posts a high priority announcement with the title whenever a toast
with readable text is submitted, including re-submissions of an already
visible toast with the same ID. Modal indicators are not announced.
* Remove empty-title toast announcement check
Co-authored-by: Velin92 <34335419+Velin92@users.noreply.github.com>
* Hide toasts from VoiceOver
The toast title is now announced by UserIndicatorController when the
toast is submitted, so letting VoiceOver also focus the toast itself
would only read the same text twice.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* Suggest recently visited rooms when forwarding messages
The Forward to screen now shows up to 5 recently visited rooms in a
Suggestions section, above a Chats section that lists every room. The
suggestions are never searched: while searching, only the Chats section
is shown and filtered. The source room, invites, spaces and upgraded
rooms are never suggested, and the section is hidden when there is
nothing to suggest.
The suggestions are resolved from the room summaries rather than room
proxies, so they show up without holding back the list, and they are
re-resolved as the room list loads after a cold start. ClientProxy now
exposes the recently visited room IDs for this.
The recently visited rooms filter is now async, so callers choose its
isolation instead of asserting it at runtime.
* Apply review suggestions to the forwarding suggestions
Rooms:
- Each room is listed once. Suggested rooms are left out of Chats unless
searching, where Chats lists every result. This also removes the
duplicated row whose selection changed without the tapped row's
animation.
- The Chats header is hidden when the section has no rooms.
Suggestions:
- Resolve them once when the screen opens instead of on every room list
update.
The count was only on the forward button at the bottom, so VoiceOver
users had to go and find it after every tap. While selecting, each
selectable message now starts its label with "N messages selected".
The label changes on every toggle, so VoiceOver reads the new count
followed by the message, as in other messaging apps.
Unselecting the last message used to end the selection, closing it
without the user asking. Selection mode is now its own state: Forward
starts it and it only ends with the close button, once the messages are
forwarded, when the timeline changes or the feature is turned off. With
nothing selected the forward button stays visible but disabled.
Replace the 100ms polling loop in the background app refresh with a
subject that the state machine's transition handler sets as soon as the
app is no longer restoring a session, whatever the outcome. The refresh
now awaits it once, with the same 5 second timeout, instead of waking
up repeatedly.
Move the wait back into the class body and silence type_body_length for
AppCoordinator rather than keeping a single-function extension around
to stay under the limit.
When iOS relaunches a terminated app for the task, the session is still
being restored asynchronously when the refresh starts. Wait up to 5
seconds for the restore to finish, bailing out early if the app isn't
restoring a session (e.g. signed out or the restore failed).
# Conflicts:
# ElementX/Sources/Application/AppCoordinator.swift
Components of a formatted body were identified by their plain characters, so an edit
that only added formatting (e.g. wrapping a word in inline code) kept the same ID.
SwiftUI then reused the existing MessageText, whose @State string ignores new input,
and the old unformatted text kept rendering.
Identify components by the hash of their attributed string so formatting changes
produce a new ID.
QuickLook requests every page up front when the viewer opens. At that point the
media timeline is still empty, so every page after the tapped media is cached as
a forward pagination placeholder. Once the timeline loads it reports forward as
end reached, so no pagination happens and nothing ever replaces those cached
placeholders, leaving the viewer stuck when swiping forward.
When landing on a placeholder, or when the timeline updates, the controller now
checks whether the data source holds a different item at that index and if so
refreshes the current page. The refresh waits for any swipe to settle, as
refreshing mid-swipe breaks QLPreviewController.
With Swift 6.4, the default value for AlertInfo.primaryButton warned that
T's Hashable conformance may be isolated and can't be used in a main
actor-isolated context. The nested AlertButton/AlertTextField types
don't depend on T, so move them to top level as AlertInfoButton and
AlertInfoTextField, and keep typealiases so existing call sites compile.
Constraining T to SendableMetatype isn't possible as the synthesized
Hashable conformances of our main actor-isolated alert enums are isolated.
Doug
Stefan Ceriu
Ivan Magda
Mauro Romito
Element CI
Valere Fedronic
Mauro
renovate[bot]
mxandreas
ElementRobot
Copilot