* Prevent foreground backfill from running when the app is active
This should be a background task, since it can severely degrade performance if the app is in use while it runs.
The worker won't run any more if the app is in foreground and will stop running if it was in background and now it's in foreground.
* Fix return inside `withTimeout`
Co-authored-by: Benoit Marty <benoitm@element.io>
* Remove initial delay: it shouldn't be necessary if the foreground state of the app is checked when the worker starts
Instead, if the app was in foreground, cancel the work and retry in 5 minutes.
---------
Co-authored-by: Benoit Marty <benoitm@element.io>
Thread notification tags have the form "roomId|threadId". clearReadRoomsNotifications
was building a RoomId from the whole tag, which is only validated in debug builds, so
in release an invalid room id reached RoomListService.room(). Add
NotificationCreator.getMessageNotificationRoomId(), the inverse of messageTag(), which
only keeps the part before '|' and checks it is a valid room id.
Also make RoomListServiceInterface.roomOrNull take a RoomId instead of a String.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Extract the logic to observe the total unread count of a MatrixClient, refreshed on each sync
heartbeat, to a shared extension and use it in HomePresenter and PreferencesRootPresenter.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Add total unread notification count to home screen
This will be calculated on each sync heartbeat (for now, using the state updates for the room list service).
* Simplify `counter` parameter logic
* Read the total unread count when the home screen is first displayed
---------
Co-authored-by: Benoit Marty <benoitm@element.io>
* Update Matrix Rust SDK to 26.10.07-nightly
* Adapt to the new QR code login task API
`generate()` and `scan()` of `GrantLoginWithQrCodeHandler` and `LoginWithQrCodeHandler`
now return a task instead of suspending until the flow is over. Wait for the task to
complete, and cancel it if the coroutine is cancelled, so that the flow is also stopped
on the Rust side.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Add tests for the cancellation of the QR code login tasks
Check that cancelling the coroutine of the link new device handlers and of the QR code
login cancels the task returned by the SDK, so that the flow is stopped on the Rust side.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Fix import ordering in the link new device handler tests
ktlint expects the imports to be sorted in lexicographic order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Benoit Marty <benoit@matrix.org>
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Checking if the work is already scheduled does a blocking WorkManager query, which was done on the main thread at session start.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Same issue as when refreshing the profile manually: the profile listener stored the profile (Base64 encoding and session database access) from the session coroutine scope, which runs on the main thread.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The thread list subscription was launched in the room coroutine scope, which runs on the main thread, so the initial sync FFI call and the mapping of all the items and diffs were done on the main thread every time a room was opened.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`getUserProfile()` was storing the user profile (DB read, avatar Base64 encoding, DB write) on the caller
dispatcher, i.e. the main thread when called from a presenter, causing glitches in the screen transition.
- Run the whole `getUserProfile()` on the session dispatcher.
- Make `DatabaseSessionStore` main-safe by running the queries on the IO dispatcher.
- Do not refresh the profile twice from the settings screen.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Use try/finally instead of the awaitClose block, so that the entries stream, the controller and the
dynamic adapters are destroyed even if the suspending onControllerCreated callback is cancelled or
throws before awaitClose is reached.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Expose edit/redaction send states and retry/abort send from the Rust SDK
Pending edits and redactions have their own send queue entries, separate
from the original event. Surface them so the UI can reflect and act on them:
- Add `SendTarget` (Event, Edit, Redaction, Reaction) to the matrix API,
with a mapper to the Rust SDK type.
- Add `editSendState` and `redactionSendState` to `EventTimelineItem` and
map them from the SDK item.
- Add `Timeline.retrySend` / `Timeline.abortSend`, which take a `SendTarget`
so the right queued request is retried or removed. Implement them in
`RustTimeline` and in `FakeTimeline`.
* Track edit and redaction send states on timeline events
`TimelineItem.Event` now carries `editSendState` and `redactionSendState`
next to `localSendState`.
- `failedToSend` is true when any of the three states is failed, so a
failed edit or redaction is shown like a failed message.
- `pendingSend()` returns the first pending state together with its
`SendTarget`; the read receipt row, the send failure dialog and the
timeline presenter use it instead of reading `localSendState` directly.
- `TimelineItemReadReceiptView` is restructured so the row is only
rendered when there is something to show, and the send state takes
precedence over read receipts.
- Update the previews provider and test fixtures for the new fields, and
make `aMessageEvent`'s send state nullable.
* Retry and remove failed sends through the timeline
Retrying or removing a failed message used the event's `SendHandle`, which
only knows about the original send. Route both through the timeline with
the `SendTarget` of the pending request instead:
- `TimelineController` gains `retrySend` (which also re-enables the send
queue) and `abortSend`, acting on the current timeline.
- `MessagesPresenter` retries via `retrySend`, and does nothing when the
event has no pending send state.
- Redacting something that was never sent (no event ID) or a pending
edit/redaction now aborts the queued request rather than sending a
redaction, and no confirmation is asked for.
- Update the presenter tests accordingly.
* Log send queue errors
Log when the SDK reports a send queue error for a room, and when the
send queue is disabled, to help diagnose messages stuck in the queue.
* Make sure we display send queue errors before verification states
* Fix logic for displaying read receipts and add more screenshot tests
* Only use states with read receipts in `ReadReceiptBottomSheetStatePreviewParam`
* Handle `LocalEventSendState = null` state just like `LocalEventSendState.Sent`
* Add `TimelineItemAction.AbortSend` and use it for both:
1. Aborting sending a message/edit/redaction from the 'sending failed' dialog.
2. Abort sending a local message when selected from the timeline -> redact action.
* Update screenshots
---------
Co-authored-by: ElementBot <android@element.io>
The dynamic entries controller of a room list is created asynchronously, once
the entries are observed. Filters set before that were silently dropped, so for
instance the search query was not applied to the rooms of a newly selected
account in the room select screen.
RustDynamicRoomList now owns the controller, remembers the last requested filter,
and applies it when the controller is created if it differs from the initial one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The share feature does not need it anymore, so there is no reason to expose it
in the matrix api module.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
When several accounts are signed in, sharing into the app no longer goes through the account selection screen. The room select screen (Share mode) now displays the selected account and an account switch on top of the room list, with a design similar to the multi account section of the settings.
Selecting another account displays the rooms of this account in place, scrolled to the top, without recreating the screen. The content is then shared from the room select screen using the selected account, with the same progress and error dialogs as when sharing with the current account. The current account is switched only once the share has succeeded, then the room is opened if the content has been shared to a single room.
Implementation:
- RoomSelectNode is now in the AppScope and uses MatrixClientProvider to get the room list of the selected session.
- ShareNode gets the SharePresenter of the selected session from its session graph, using the new ShareBindings.
- SessionGraphFactory is moved to the matrix api module so that it can be used by features.
The account selection screen is still used for permalinks.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The RustMatrixClientFactory was using a single RustClientSessionDelegate for
all the clients. The delegate keeps a reference to the last bound client only,
and didReceiveAuthError does not tell which session is concerned. With several
accounts, when the session of one account was revoked, the session of the last
restored account was invalidated and its local data deleted instead, while the
revoked session kept on syncing with an invalid token. Also the isLoggingOut
flag was never reset, so any later auth error was ignored.
The clients which are not associated to a stored session (temporary clients
and clients used to perform a login) now use a NoOpClientSessionDelegate.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Add search backfill worker
This will run on background at most once an hour while the device has internet connectivity and the device is charging and start back-paginating through the user's rooms to make sure the search results are populated.
It'll run for the maximum time the default workers allow, 10 minutes.
* Create `RustMatrixClient.Factory` AssistedFactory to help with DI and add `SearchBackfillService`
* Start search backfill when entering the search screen, just once. This should help getting initial search results if none or few are found at first
Remove dependencies flagged as unused by the Dependency Analysis Gradle Plugin
(`./gradlew buildHealth`) and explicitly declared in module build files.
Removals were skipped when the dependency provides transitively something the
module (or a consumer of an `api` dependency) uses directly, as well as for
runtime-only dependencies (element-call-embedded, sentry-android,
rustls-platform-verifier). Dependencies added by the convention plugin helpers
(composeDependencies, testCommonDependencies) are left untouched.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Clear the listener when RustSessionVerificationService is destroyed.
- IncomingVerificationRequestObserver removes the listener of the clients which are not in the MatrixSessionCache anymore.
- Remove the sessions from the MatrixSessionCache when they are removed from the SessionStore (logout, account deactivation).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The factory lives in libraries/matrix/impl because that is the only module compiled against the Rust SDK, and is app-scoped because a call is started for whichever account it belongs to rather than the one on screen.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Upgrade to `rustls-platform-verifier:0.2.0`.
This re-enables certificate revocation checks, but v0.2.0 contains a list of CRL servers that can be accessed using clear text requests to check the validity of certain certificates, which should fix the issue that prevented us from using certificate revocation and at the same time strengthening the security of the client app.
Since we already had some network configuration in Element X, and `network_security_config.xml` files can't be merged, what we can do is manually download and merge the XML contents using `tools/dependencies/update_rustls_platform_verifier.py` like this:
```sh
./update_rustls_platform_verifier.py 0.2.0
```
It will automatically bump the Gradle dependency and merge the security config entries.
* Bump SDK bindings to `v26.09.28`, containing the rustls bump on the SDK side
* Fix unused resources caused by `app/src/main/res/xml/network_security_config_element.xml`
* Migrate `SqliteStoreBuilder.passphrase` usage to use `highEntropyPassphrase`
This is the first step in migrating existing sessions from using a passphrase that needs key derivation, slowing down opening SDK DBs to just a raw key using the already random keys of the 'passphrase'
* Remove no longer necessary `keyOfSize` extension function
Add an optional thumbnail to `MatrixUser` and `AvatarData`, filled from the session
database for the other accounts in the room list header, the settings and the account
selection screen. `ImageAvatar` renders this thumbnail instead of the initial letter while
the avatar is loading or when it fails to load, for instance when the homeserver of the
current account is not federated with the one of the other account.
Fixes#5571
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add a `userAvatarData` column to the session database, containing the base64 encoded
thumbnail of the user avatar. It will allow rendering the avatar of an account without
having to use its Matrix client, for instance on the signed out screen, or for other
accounts when the homeservers are not federated.
The thumbnail is downloaded when the user profile is retrieved or updated, and only if
the avatar URL has changed. The profile is now also persisted when received from the
own profile subscription.
Part of #5571
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bump SDK bindings to `v26.09.26`
This version contains a fix for issues in `v26.09.25` related to certificate verification.
* Fix breaking API changes in the latest bindings
* Unify `FeatureFlags.RoomThreadList` with `FeatureFlags.Threads`
* Add global search results history: keep the latest 25 items used in the global search, save them to an encrypted file store.
* Integrate the search history in the global search feature
* Add `MatrixClient.getRoomInfo` and use it in `GlobalSearchPresenter`
---------
Co-authored-by: ElementBot <android@element.io>
joel.poyet
Benoit Marty
ElementBot
Jorge Martin Espinosa
Benoit Marty
ganfra
Valere