* Model the fake voice recorder on a cancellable recording job
FakeVoiceRecorder pushed a whole recording synchronously from a single
suspending call, which made it both weaker and stricter than
DefaultVoiceRecorder.
Every level emission carried the same elapsed time and the emissions were
coalesced by Molecule, so no intermediate recording state was observable and
the level-limit test had to skip half the emissions to compensate. Each level
now advances the test time source and suspends for its share of the recording
duration, so the states arrive one at a time and that magic number is gone.
Call verification moved to the constructor lambdas the rest of the repo uses,
in place of hand-rolled counters and assertCalls. The counters discarded the
argument, so nothing pinned that cancelling a recording stops it with
cancelled = true; that is now asserted. Truth is no longer needed by the
fixture module.
A second startRecord() no longer raises an error where production only warns
and returns, and stopping or deleting terminates an in-flight emission loop
the way cancelling the real recording job does, so a stale recording state can
no longer arrive after the recording has finished.
* Keep each recording's level loop to its own recording
The level loop checked a single isRecording flag, which cannot tell "this
recording was cancelled" from "a later recording has started". After a cancel
followed by a new start, the first loop resumed, saw the flag set again, and
advanced the shared test time source, so the new recording reported the elapsed
time of both. Each recording now carries an id and its loop stops as soon as
that id is no longer the active one.
Declining an invite from the full screen invite left the user on that
same screen, so they had to press back themselves to get to the room
list. Both decline paths are affected: the plain decline handled by
AcceptDeclineInviteView, and the decline and block sub screen, which
navigated up into the join room flow instead of out of it.
Navigate up from the join room flow on a successful decline, and give
DeclineInviteAndBlockEntryPoint a callback so the sub screen can report
a successful decline separately from a back press. The room list flow
supplies the same callback, popping the sub screen once the invite has
been declined.
* Give the room name in the timeline top bar a 48dp tap target
The row carrying the room avatar and name is the control that opens the
room details, but it is only as tall as its content, which is under the
48dp minimum recommended for a touch target. Constrain it to a minimum
height of 48dp. The children stay centred inside the app bar, so nothing
moves visually.
* Update screenshots
The accessibility snapshot of the timeline is the only one the change
affects: the node which opens the room details now reports a 48dp tall
bounding box. The room name, the avatar and the icons stay where they
were.
* Rename `UrlContentFetcher` to `ClientUrlContentFetcher` and add missing base URL data (server name, homeserver URL)
* Avoid passing the `homeserverUrl/serverName` around.
Calculate the URL in `DefaultRemoteEnterpriseConfigRetriever` using the newly added `homserver` and `server` values as the possible base URLs, depending on the remote config source
* Make sure we don't perform blocking requests to fetch the remote config when restoring a session
Add a `needsRefresh` parameter to `RemoteEnterpriseConfigResult.NotFound` to handle this, and store a `no-config` value in the store to indicate an endpoint has been checked and no config was found
* Bump enterprise module
Codecov reported 55.55% patch coverage on the previous commit: four of the nine
measured lines were only partially covered. No test paginates forwards in a
thread timeline, and the focus states Requested, Loading and Failure were never
live when a forward pagination arrived, so only the Success branch of
isPending() was ever evaluated both ways.
Add a test per uncovered state: a forward pagination is deferred while the focus
request is still being debounced and while the focused timeline is being
created, it is performed again once the request has failed, and it is dropped in
a thread timeline while a backward one still goes through.
The pagination recorder now also sits on the live timeline, and the presenter is
built on that same timeline. Before the detached timeline exists, a pagination
that escaped the gate would go to the live one, so without this the new guards
would pass against the unfixed presenter. The deferred cases end on the emitted
state rather than on cancelAndIgnoreRemainingEvents for the same reason: the
recorder throws from inside the presenter coroutine and cancelling swallows it.
Verified by reverting the gate: the three deferred-pagination tests then fail
with "This lambda should never be called."
* Refresh the room members when a mention is started
The mention suggestions read room.membersStateFlow, which is a cache filled
only by an explicit updateMembers() call. Nothing calls it while a room is
open, so a member who joined after the room was opened never appears in the
suggestion list until the room is left and entered again.
Call updateMembers() when a mention search starts. The trigger is
distinctUntilChanged on "the current suggestion is a mention", so it fires
once per mention rather than on every keystroke, and fetchRoomMembers already
no-ops while a fetch is in flight.
The `Provider` suffix reads as a dependency provider rather than as preview
data, and it collides with the real providers in the codebase — `StringProvider`,
`PickerProvider`, the login feature's `AccountProvider` — so the name says
nothing about which of the two a class is. `PreviewParam` says it.
195 classes are renamed, along with the 185 files named after them, the konsist
rule that enforces the convention, the presentation-class file templates and the
onboarding documentation.
This cannot be split. `Konsist.scopeFromProduction()` scans the whole project, so
flipping the assertion before every class has moved leaves the rule red, and a
rule that accepted either suffix during a transition would be exactly the kind of
compatibility layer this convention change is meant to remove.
Two judgement calls in the rule itself. The `name.endsWith("PreviewProvider")`
exclusion is dropped: its only job was to reject a redundant `Preview` before
`Provider`, and the new suffix already contains it; no class currently ends with
`PreviewProvider`, so removing it changes nothing today. And
`EditableAvatarViewUriProvider` is renamed rather than deleted from the exclusion
list even though no such class exists in this repository, since it presumably
comes from the modules overlaid for the enterprise build.
Nothing keyed off the old suffix: no snapshot filename contains a provider class
name, so no Paparazzi image changes, and the Kover variants match on `*Presenter`,
`*State` and `*ViewKt`, so coverage bounds are unaffected.
An intent carrying uris is now accepted before the mime type list is
reached, so the image check that every uri share used to exercise is only
covered by an intent which has nothing to send. Add one case per listed
mime type without a uri.
Cover the rest of the handler while it is under test: an intent with no
resolvable type, a send multiple without a stream, an action which is
neither send nor send multiple, an empty caption, a plain text intent
without text, the mime type reported by the content resolver for the uri,
and the explicit intent built for the application which will read it, both
when the read permission can be granted and when it cannot.
* Extract `IsEnterpriseBuild` use case
Having it inside `EnterpriseService` made having DI cycles with the `BuildMeta` provider too easy
* Rename `EnterpriseService.defaultHomeserverList()` to `homeserverAllowList()`
This seems more aligned with the way this list works
* Move most of the logic from `:libraries:wellknown` to `:enterprise:feature:enterprise`, both `shared` and `impl` modules
Ideally I would have added everything into `impl`, but some of the classes needed to be shared between the different `:enterprise:features` modules, and those are in the `shared` module, lacking a better name/strategy
* Add `EnterpriseService.isElementProEnforced`
With this, we don't need to provide the `RemoteEnterpriseConfig` anymore to any consumers, everything goes through `EnterpriseService` or other providers
* Remove `EnterpriseService.overriddenElementWellKnown`
This leaks the remote enterprise config/element well known contents to the app in a public interface.
* Create `CustomMapTilerConfigProvider` to avoid leaking the `RemoteEnterpriseConfig` in public APIs
This commit also starts moving some of the well-known related values to the enterprise modules
* Add missing docs to `EnterpriseService` and `SessionEnterpriseService`
* Fix tests
* Fix lint issues
* Bump enterprise module
Opening a room from a notification asks the timeline to focus the notified
event. When that event is outside the loaded live window the controller
creates a detached timeline for it, and a detached timeline always carries a
forward loading indicator as its last chronological item. The items list is
reversed for display, so that indicator is the bottom-most row and is composed
on first layout, which unconditionally emits a forward pagination request
nobody asked for. Because a notified event sits close to the live end, that one
page reaches the end, and the controller responds by closing the detached
timeline. The live window replaces the item list while it is still anchored at
the bottom, so the user lands on the newest message and the focus request is
discarded.
Defer automatic forward pagination while a focus request is still pending. Once
the focused event has been rendered the viewport has moved off the indicator
row, so only a real scroll back to the live end switches to the live timeline,
which is what the controller's existing behaviour is for. Backward pagination
and the explicit jump-to-live action are untouched.
ktlint reports the TestScope import as unused because the type only appears in
a context parameter, which the rule does not look at. The file carried a
file-level suppression for exactly that before this branch dropped it.
On shorter screens the software keyboard can cover the field the user is
typing into on the login and account provider screens, because nothing
scrolls the content back into the reduced viewport once the keyboard is
shown.
Apply the existing bringIntoViewOnImeVisible modifier to those fields,
the same way the recovery key screen already does.
The outgoing verification flow had no client side timeout: if the other
session never answered, the screen waited on "Waiting to accept request"
for as long as the user left it open, with no indication that the
request could no longer succeed.
Bound the wait to the ten minutes the Matrix specification gives a
verification request. Past that the other session can no longer accept
it, so cancel the request and move to the canceled state, which already
offers to start again.
A m.key.verification.request sent from a client that supports in-chat
verification carries a plain text body for clients that do not. Element X
has no msgtype of its own for it, so it fell through to OtherMessageType
and the timeline printed that body, telling the user their client does
not support in-chat key verification right after a verification they had
just completed.
Drop the event when building the timeline items, as Element X iOS does.
The sanitize() helper applied to the login, password and account deactivation
password fields promises to remove "any new line characters" but only removes
LF. A value pasted from a source with CRLF endings keeps its CR, which is
invisible in the field and is sent to the homeserver as part of the password,
so the login is rejected while typing the same characters by hand works.
Drop every line separator instead of LF only, in both copies of the helper.
Whitespace that can legitimately be part of a password, such as spaces and
tabs, is left untouched.
showLeaveRoomAlert ran its whole body inside client.getRoom(roomId)?.use { }.
When getRoom returned null, which happens for a room the client can no longer
resolve, the body was skipped without writing any state: leaveAction stayed
Uninitialized, so no confirmation dialog and no error was displayed and
Leave room appeared to do nothing at all.
Handle the missing room explicitly and surface it as a failure, which
AsyncActionView already renders with the generic error dialog. leaveRoom used
a !! for the same lookup, so it reported the miss as a NullPointerException;
it now throws the same named exception.
handleIncomingShareIntent only accepted an intent whose resolved mime type
started with image/, video/, audio/, application/, file/, text/ or */. An
ACTION_SEND carrying EXTRA_STREAM with any other top level type, such as the
message/rfc822 that some apps use when attaching a file, fell through to null
and the share was dropped before the room picker ever appeared, even though
the manifest filter accepts */*.
The uris are extracted before that check, so their presence is enough to know
the intent carries something to send. Accept the intent when it has uris and
keep the mime type list for the case where it does not.
Cover the last remaining interfaces across features/announcement, cachecleaner,
call, contentscanner, createroom, knockrequests, lockscreen, rolesandpermissions,
startchat, userprofile and viewfolder, with their members and parameters.
Grouped into one commit rather than eleven near-empty ones, per the AGENTS.md rule
about tiny commits.
This completes every features/* api module.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Cover the remaining interfaces of features/login, features/logout,
features/preferences and features/share, along with their members and parameters.
Points recorded here: AccountProviderAccessControl returns true on a build with no
enterprise restriction, ExtraDeveloperOptionsRenderer is bound to a no-op in the
standard build, DirectLogoutView draws nothing until a logout event is sent, and
CacheService exists because clearing a cache destroys the client and the app has
to react.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document AcceptDeclineInviteEvents, AcceptDeclineInviteView and the
SeenInvitesStore interface.
The view doc explains why it is a shared component rather than part of one screen:
it is embedded everywhere an invitation can be acted on, so the confirmation
dialogs behave identically in the invite list and in a room preview.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document RageshakeFeatureAvailability, LogFilesRemover and the BugReporter
interface, and complete the docs of its remaining members.
The BugReporter doc records that progress and the outcome arrive through the
listener passed to sendBugReport rather than through a return value or an
exception.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document LocationService, StaticMapUrlBuilder, TileServerStyleUriBuilder and the
members of ActiveLiveLocationShareManager that had none.
The two URL builders now say what happens when no map provider is configured for
the build, which is the case LocationService.isServiceAvailable exists to guard.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document RoomMemberModerationState, RoomMemberModerationEvents and
RoomMemberModerationRenderer along with their members and parameters.
The renderer doc states that it draws nothing until the host screen asks for a
member's actions, and that onSelectAction exists so the host can navigate for the
actions that need a screen of their own.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document PollContentStateFactory, SendPollResponseAction and EndPollAction along
with their members and parameters.
The two action interfaces exist to wrap a plain timeline call, so their docs say
what they add: both capture an analytics event on success, which is the reason
callers should go through them rather than calling the timeline directly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Document LeaveRoomState, LeaveRoomEvent and LeaveRoomRenderer.
The renderer doc records the two things a host screen needs to know, both taken
from LeaveRoomPresenter and LeaveRoomView: it draws nothing until a leave event is
sent, and onSelectNewOwners fires specifically when the user is the last owner of
a room that still has other members.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
hayyaksi
Jorge Martin Espinosa
Jenna Vassar
Benoit Marty
Cipherd
Benoit Marty
bxdxnn
Benoit Marty